Minimum required depth of a domestic box gutter?
Can a box gutter have a change of direction?
What is the minimum required roof pitch for corrugated sheeting (degree)?
Can a down pipe spreader accept a roof volume greater than 15sqm?
What is the maximum static pressure (other than a fire service) within a building?
What is the minimum distance in height between the top of an overflow relief gully and the lowest fixture connected to the drain?
Minimum size of an unventilated branch drain?
Floor fall ratio in shower areas?
In what order would you carry out testing on a shower (after mains water has been ruled out as a contributor). Select one of the following answers:
Are balustrade mounting brackets required to be installed before or after the membrane application?
Select what is NOT a compliant form of water supply isolation to a continuous flow water heater.
Please read the below scenario and select the mud map that matches the description.
CCTV has identified two breaks within the property storm water, one within bedroom 1 WIR and the other outside bedroom 4. **To enlarge the image, right click and select 'Open image in new tab'.
Please select the thermal image photo showing water egress from the shower screen.
**To enlarge the image, right click and select 'Open image in new tab'.
Select the thermal photo showing water egress from the balcony above.
**To enlarge the image, right click and select 'Open image in new tab'.
Is this rain head compliant?
**To enlarge the image, right click and select 'Open image in new tab'.
Is this Downpipe spreader compliant?
**To enlarge the image, right click and select 'Open image in new tab'.